2-Station Beer Keg Filler
- Apr 16, 2026
- 142
- tiantai
I. General introduction of 2-station beer keg filler
The two-station beer keg filler is a compact and efficient solution for filling beer kegs with precision and minimal product loss. Designed for small to medium-sized breweries, this equipment allows simultaneous filling of two kegs, optimizing production throughput while maintaining consistent quality.
II. Main Configurations of two-station beer keg filler
- Dual Filling Stations: Enables two kegs to be filled at the same time, increasing efficiency. It is explored and designed for insulated beer kegs (Stainless steel and plastic keg, draft beer keg). It also can be used for beverage filling.
- All procedures are thoroughly controlled by SIEMENS programmable controller. All control parameters (time values) can be adjusted.
- The separation on systems of electrics and air avoid the short circuit by condensate liquor, which is caused by low environment temperature and make sure an easy repair.
- Be equipped with CIP recycle line. Easy operation and no residue remained.
- The machine adopts anoxybiotic technique to guarantee purity and fresh taste of beer.
- Accurate Level Control: Equipped with level sensors or float valves to ensure precise filling without foam overflow.
- CO₂ Purge System: Eliminates oxygen from the keg before filling, preserving beer freshness and shelf life.
- Stainless Steel Construction: All contact parts made from food-grade stainless steel for durability and hygiene.
III. Technical Specifications of two station beer keg filler
Contact us immediately to get your professionl proposal and price of two-station beer keg filler.
The two-station beer keg filler is a compact and efficient solution for filling beer kegs with precision and minimal product loss. Designed for small to medium-sized breweries, this equipment allows simultaneous filling of two kegs, optimizing production throughput while maintaining consistent quality.
II. Main Configurations of two-station beer keg filler
- Dual Filling Stations: Enables two kegs to be filled at the same time, increasing efficiency. It is explored and designed for insulated beer kegs (Stainless steel and plastic keg, draft beer keg). It also can be used for beverage filling.
- All procedures are thoroughly controlled by SIEMENS programmable controller. All control parameters (time values) can be adjusted.
- The separation on systems of electrics and air avoid the short circuit by condensate liquor, which is caused by low environment temperature and make sure an easy repair.
- Be equipped with CIP recycle line. Easy operation and no residue remained.
- The machine adopts anoxybiotic technique to guarantee purity and fresh taste of beer.
- Accurate Level Control: Equipped with level sensors or float valves to ensure precise filling without foam overflow.
- CO₂ Purge System: Eliminates oxygen from the keg before filling, preserving beer freshness and shelf life.
- Stainless Steel Construction: All contact parts made from food-grade stainless steel for durability and hygiene.
III. Technical Specifications of two station beer keg filler
| Function | Beer Keg Filling |
| Capacity | 40～60kegs/hour |
| Cylinder max stroke | 300mm |
| Table-board size | 600mm×500mm |
| Table-board height | 400mm |
| Exterior dimensions | 600mm×650mm×1550mm |
| Net weight | 115Kg |
| Pouring mode | Keg top side up |
| Applicable keg | diameter φ250～φ500, height 360mm～500mm |
Contact us immediately to get your professionl proposal and price of two-station beer keg filler.
.jpg)
.jpg)
zhutu.jpg)