500L two body-three vessel brewhouse equipment
- Nov 16, 2022
- 179
- beer
500L two body-three vessel brewhouse equipment
Brief introduction
Two body-three vessel brewhouse is a little special structure in microbrewery, which consists of a combined vessel of mash/lauter tun on top and whirlpool tun or hot liquor tank on bottom, and another vessel of brew kettle. This kind structure is suitable for those who want to lauter wort by gravity without grant, do fly sparge, save budget or save floor area etc.. It can be placed in restaurants, pub, bars, hotels or independent brewing room, which is common and popular in some European countries. If the budget and space is allowed, the typical mash/lauter tun+kettle/whirlpool tun+hot liquor tun is still recommended as it is easier to understand and operate.
Quick overview of 500L two body-three vessel brewhouse
Main configuration of 500L two vessel-three vessel brewhouse
A.500L mash/lauter/whirlplool(or hot liquor) tun
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel/glass manway
-CIP spraying ball and sparging ring
-Side mounted grain outdoor with grain chute
-Grain rake with VFD controlled motor& turbine reducer
-False Bottom/Filter
-Tangential whirlpool inlet
B.500L brew kettle(or kettle/whirlpool tun)
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel/glass manway
-CIP spraying ball
-Steam vent by steam condensor with spray nozzles
C.Other auxiliary equipment
-3T Sanitary wort and hot liquor pump
-Manifold for liquid flow easily controlling
-Completely stainless steel work platform
-6m2 Two stages or single stage plate heat exchanger
-Sanitary wort aeration mounted with stone
-10L Sanitary SUS304 full welded yeast feeder
-PID control panel
Contact us immediately to get latest specification and price of 500L two body- three vessel brewhouse equipment.
Brief introduction
Two body-three vessel brewhouse is a little special structure in microbrewery, which consists of a combined vessel of mash/lauter tun on top and whirlpool tun or hot liquor tank on bottom, and another vessel of brew kettle. This kind structure is suitable for those who want to lauter wort by gravity without grant, do fly sparge, save budget or save floor area etc.. It can be placed in restaurants, pub, bars, hotels or independent brewing room, which is common and popular in some European countries. If the budget and space is allowed, the typical mash/lauter tun+kettle/whirlpool tun+hot liquor tun is still recommended as it is easier to understand and operate.
Quick overview of 500L two body-three vessel brewhouse
| Structure: |
500L mash/lautertun/whirlpool tun+500L kettle tun 500L mash/lautertun/hot liquor tun+500L kettle/whirlpool tun |
| Tank Capacity: | 500L (+25% Headspace minimum) |
| Tank size: | MLWT or MLHTΦ1060x2800mm; KTΦ1060x2500mm |
| Material: | Stainless steel or copper cladding |
| Batches/Day: | 1-2 batches per day |
| Heating Way: | Electric, steam or direct fire |
| Electric Power: | 3phase/380(220,415,440...)v/50(60)Hz |
| Note: | Note: 1hl=100liter; 1Gallon=3.7854liter; 1Barrel (BBL) =117Liter; |
Main configuration of 500L two vessel-three vessel brewhouse
A.500L mash/lauter/whirlplool(or hot liquor) tun
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel/glass manway
-CIP spraying ball and sparging ring
-Side mounted grain outdoor with grain chute
-Grain rake with VFD controlled motor& turbine reducer
-False Bottom/Filter
-Tangential whirlpool inlet
B.500L brew kettle(or kettle/whirlpool tun)
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel/glass manway
-CIP spraying ball
-Steam vent by steam condensor with spray nozzles
C.Other auxiliary equipment
-3T Sanitary wort and hot liquor pump
-Manifold for liquid flow easily controlling
-Completely stainless steel work platform
-6m2 Two stages or single stage plate heat exchanger
-Sanitary wort aeration mounted with stone
-10L Sanitary SUS304 full welded yeast feeder
-PID control panel
Contact us immediately to get latest specification and price of 500L two body- three vessel brewhouse equipment.
